Ooznest - Active Questions

G Code error code

Tue, 12 Sep 2023 01:23:04 -0700

Hi. When i try to cut from a file that i have made in Vcarve Pro i get the following error

1/09/2023, 16:00:21: Connected to 192.168.251.2

11/09/2023, 16:01:09: Upload of MOSSIDE2.crv successful after 2s

11/09/2023, 16:01:10: M32 "0:/gcodes/MOSSIDE2.crv": File 0:/gcodes/MOSSIDE2.crv selected for printing

Error: Bad command: [0x11]ࡱ[0x1a]

Error: Bad command: >

Error: Bad command: [0x03]

Error: Bad command: [0x09]

Error: Bad command: [0x06]

Error: Bad command: [0x01]

Error: Bad command: [0x10]

Error: Bad command: [0x02]

Error: Bad command: [0x01]

Error: Bad command:

Error: Bad command: z[0x01]

Error: Bad command: [0x01]

Error: Bad command: |[0x02]

Error: Bad command: [0x02]

Error: Bad command: ~[0x03]

Error: Bad command: [0x03]

Error: Bad command: ][0x04]

Error: Bad command: [0x04]

Error: Bad command: [0x06]

Error: in GCode file line 86 column 201: GCode command too long

Cancelled printing file 0:/gcodes/MOSSIDE2.crv, print time was 0h 0m

⟐ Answered September 12, 2023, 1:23 MST

The IP Address on my WorkBee keeps changing?

Mon, 11 Sep 2023 06:40:49 -0700

The IP Address on my WorkBee keeps changing?

⟐ Answered September 11, 2023, 6:40 MST

Wood table OX CNC 750x750

Mon, 11 Sep 2023 05:49:51 -0700

Hello, I know the OX CNC project is very old, but I have a machine that I bought from you with dimensions of 750x750, and I also have the expansion kit for 1500x1500. Could you please tell me the exact measurements of the wooden boards where the parts are housed for cutting or carving? I believe you had them for sale, but the shipping costs weren't economical for me. Would you kindly provide me with the exact measurements for the boards for both sizes? Thank you very much.

(Note: I don't have access to specific product information or updates beyond my last training data in September 2021, so I can't provide current details about OX CNC products. You might want to visit their official website or contact them directly for the most up-to-date information.)

⟐ Answered September 11, 2023, 5:49 MST

replacement touch probe connection to main body

Tue, 05 Sep 2023 02:29:50 -0700

Hi,

Cleverly, i managed to destroy the movable part of my Touch probe (dont ask) I have a replacement, but do i need to replace everything or can i use just the metal plate and connect the device to the head piece on the main machine as that was not damaged?

Hope that makes sense

Chris

⟐ Answer accepted September 05, 2023, 2:29 MST

How to disassemble wheels?

Wed, 30 Aug 2023 01:22:48 -0700

Is there a way to disassemble the wheel? Without damaging any of the parts (bearing or the wheel itself)?

I've just recently received an order that included 3 gantry plate kits with 6 wheels each, and after it arrived I was so excited that I quickly hurried to put the wheels together... Watching some random video on YouTube, showing the washer being placed outside, between the bearing and the spacer, I quickly pressed the bearings in the wheel housing and proceeded on assembling the gantry, but then as soon as I would tighten it, the wheels weren't turning. Then, trying to find some official Ooznest diagram/drawing, I ended up looking at the gantry assembly for the workbee, which showed the washer being placed inside the wheel, between the bearings. SO my issue must definitely be because, without that washer there, as soon as I start to tighten it, it pulls the center of the 2 adjacent bearings towards eachother, and the bearings can't function smoothly anymore.

The material of these Solid V Xtreme wheels is extremely tough, and I really don't know how to go about it... But I would like to remove the bearings and place the washers between them, and still use the wheels... I wouldn't want to just order new wheels and throw these away like that, would be wasteful...

⟐ Answered August 30, 2023, 1:22 MST

Order ID: 330828 ILIES MARIAN PETRU

Wed, 30 Aug 2023 01:21:15 -0700

I want to connect my workbee z1 v1 to my computer and I can't I want t

I need technical support

⟐ Commented August 30, 2023, 1:21 MST

Workbee router head setting

Fri, 25 Aug 2023 15:08:16 -0700

Hi, so I’ve set everything up and was just trying to carry out the first test project and noticed that the bottom nipple (coupler) underneath the router control is hitting the 18mm mdf before the router bit is. I had set the router head at the height instructed in the setup stages and have also made sure the router but is protruding only 30mm as also requested.

Surely the only way of solving this is lowering the height that the router is mounted? Then I figure I’d have to redo the tough probe configuration prior to carrying out the test again?

Many thanks

⟐ Answered August 25, 2023, 15:08 MST

Change workbed height on workbee 1000 x 1000

Fri, 18 Aug 2023 01:14:44 -0700

I have a workbee 1000 x 1000 and assembled it using v2.1 documentation which has no mention of being able to have two different heights for the workbed (as in the assembly documention v1.4).

Is it possible to use the method 1 described in v1.4 of the documentation for a 1000 x 1000 workbee CNC?

⟐ Answered August 18, 2023, 1:14 MST

Keep losing connection to the duet Web control

Thu, 17 Aug 2023 01:13:35 -0700

Having trouble connecting to the duet Web control using WiFi. When I do manage to connect it loses connection almost straight away and tries reconnecting again. It was working fine until I'd completed a project and homed the machine then had trouble since. Gone through yat and got the ip address and the message that it's connected to the WiFi.

⟐ Commented August 17, 2023, 1:13 MST

'Touch Probe Panel ' not shown on the panel

Wed, 16 Aug 2023 02:07:41 -0700

Hi,

I have a touch probe and double / triple checked that all the connections to the control box and the clip to the mill is all correctly set but I don't see the 'Touch Probe Panel' on the web page control panel.

Am I missing something?

Thanks for your help.

Siamak

⟐ Answer deleted August 16, 2023, 2:07 MST

Quiet router swap over

Wed, 16 Aug 2023 02:06:11 -0700

has any one changed the router to a spindle router to reduce noise. been recommended a VEVOR 1.5KW Air Cooled Spindle Motor with 1.5KW Variable Frequency Drive Inverter VFD Spindle Motor Kit and not sure it is the correct thing for me before i spend the money. any help would be great

thanks

⟐ Answer accepted August 16, 2023, 2:06 MST

How to add a second endstop y (resolved)

Wed, 16 Aug 2023 01:16:58 -0700

Bonjour comment configurer un deuxième endstop sur le deuxième moteur axes y afin de bien assurer la géométrie ?

Hello, how to configure a second endstop on the second y-axis motor in order to properly ensure the geometry?

⟐ Edited by author August 16, 2023, 1:16 MST

How to connect using a chromebook

Sun, 13 Aug 2023 02:59:45 -0700

Hi I'm looking for a guide or help on how to connect by ethernet using a Chromebook, there are no usual windows IP settings to change, thanks in advance.

⟐ Commented August 13, 2023, 2:59 MST

How to wire ustepper S32 with arduino R3?

Fri, 11 Aug 2023 00:45:28 -0700

I want to use arduino to control ustepper s32 motor controller, but I don't know how to wire it and program it to let the linead actuaror move on ardunio.

⟐ Commented August 11, 2023, 0:45 MST

Duet does not auto-connect to WiFi

Mon, 07 Aug 2023 09:21:14 -0700

Hi all,

I'm sure this is a very basic newbie issue but it's driving me crazy!

I'm on my Mac, connecting by USB to the Duet and using SerialTools to add my WiFi network and connect and this works fine. The WiFi LED on the Duet glows purple and I can connect to it using DWC in my browser. But when I disconnect the USB and power up the Workbee the WiFi LED glows red but the module does not auto-connect so I can no longer access the Duet. Back on a USB connection I can see that the Duet still has the correct settings stored to join the network.

Looking at the config.g file from DWC I can see that the M552 S1 command seems to be active.

Why won't it join automatically?

⟐ Commented August 07, 2023, 9:21 MST

How do I change home position

Mon, 17 Jul 2023 12:54:38 -0700

Hi All,

I have set my home position to back right corner stupidly, now I want to change it to front left corner. How do I do that I can't remember and I can't find how I set it in the first place.

Chris

⟐ Commented July 17, 2023, 12:54 MST

Post processing software options

Thu, 13 Jul 2023 22:32:12 -0700

I am using Fusion 360 and I am setting up my machine but I need to specify post processing software. I have seen grbl widely referred to but will this work? I have also seen reprap referred to.

⟐ Answered July 13, 2023, 22:32 MST

Access point only whilst usb connected

Thu, 13 Jul 2023 02:33:40 -0700

I think it’s to do with config file - where do I find the file and what to change I’m on a Mac by the way

thanks

⟐ Answered July 13, 2023, 2:33 MST

My Home all button not working

Fri, 30 Jun 2023 05:50:05 -0700

I have an issue with my Workbee Z1+ machine. Been working fine the last couple of months but all of a sudden when trying to home X,Y and Z it will not go back to start position, leaving it in the middle of the machine. Please can someone assist me with this. Much appreciated.

⟐ Answered June 30, 2023, 5:50 MST

Wifi connected machine constantly disconnects and reconnects

Tue, 20 Jun 2023 09:06:11 -0700

Wifi connected machine constantly disconnects and reconnects every second on repeat This makes it unusable.. This started happening after updating the firmware, please can someone help fix this issue.

Many thanks,

Sam

⟐ Commented June 20, 2023, 9:06 MST