⟐ Answered January 04, 2022, 5:27 MST

⟐ Commented November 12, 2024, 10:17 MST

⟐ Commented March 15, 2023, 2:09 MST

i keep getting a eror g0/g1 target outside machine limits every time i run my machine . it positions my router to the carving start point but will not plunge and run. im not a great tecnical person so alll help would be appreciated.

⟐ Answered September 19, 2020, 2:04 MST

⟐ Commented January 25, 2026, 10:10 MST

Apologies if this is really obvious. I ordered the Workbee Z1 + , which has been received and is in full working order. I have a query on a bit I received with it called a Calibration Endmill 0.006" x 1.4" x 2.2" x 30 deg. I'm not sure of the purpose of this endmill. Is it just a 30 deg v bit for carving or does it have some other purpose that I am unaware of.

Thanks

L

⟐ Answered January 05, 2022, 20:46 MST

⟐ Answered October 19, 2024, 10:14 MST

⟐ Commented May 20, 2021, 19:49 MST

⟐ Answered April 14, 2021, 7:28 MST

message

No Spindle Tools Defined. Use M950 to define a spindle and M563 to assign that spindle to a tool.

i cant see where to change the tool

⟐ Answer edited November 05, 2024, 15:10 MST

Is there anyone on here who might be happy to come to Oxfordshire and run us through the basics to get us started?

Thanks

⟐ Commented November 20, 2025, 9:25 MST

I have a fairly high spec, expensive, laptop for running cad/cam etc but don’t like the idea of travelling back and forth to my garage with it. Aside from the moving around, I am not happy at exposing it to the dusty environment in there. So would like to setup a cheaper system that can stay in the garage dedicated to the workbee just for gcode files etc. Any advice on minimum specs.

⟐ Answered May 21, 2024, 4:52 MST

2. Connecting your Duet to a Network - Ethernet

Unfortunately, at the end of the configuration I cannot access Webcontrol via the IP address. However, using command prompt I can successfully ping the WorkBee at the fixed IP address I assigned. I’ve been using YAT to try and debug, and all standard commands seem to return sensible values (M21, M503, M552, M554, M553, M503).

I have tried disabling the Windows 10 firewall and turning on various sharing options for the local intranet. I’ve tried accessing the web control from both MS Edge and Google Chrome. I’ve tried disabling IPV6. I am currently using a standard ethernet cable (not a crossover) since the computer is relatively new (if it matters, the driver for the ethernet adapter is listed as Qualcomm Atheros r8172/8176). I am running wifi as well, but set up the (wired ethernet) on a different subnet as the guide above shows.

So all in all, I’m confused why the pinging works but I cannot access the web control from a browser. Any tips much appreciated, and of course I’d be happy to post more output from YAT or enter into discussion to help resolve the issue.

⟐ Answer deleted December 11, 2022, 5:15 MST

I am trying to square it around the Y axis using the 4 screws of the router mount, but I find it hard to fine tune it. For the X axis, I was considering shimming between the router mount and the Z axis C-beam, but I also consider trying to rotate the whole X c-beam on its mounting plates. What do you recommend ?

Thanks.

⟐ Answered August 16, 2022, 15:14 MST

I have issues calibrating Y Axis on a 1000x1000,

I followed the Step/mm Guide, reporting correct values in customconfig.g, using a 60x60 square. Everytime I’m not squared, with big gaps, for example 58.78 or 64.88.

Tensionning is done, and X axis is pretty close to reality. Do I miss something ?

Thx for your precious help

Guillaume

⟐ Commented April 27, 2021, 0:01 MST

Updated software etc

Disabled jog with M564 S1 H0 in customconfig.g etc but when try to jog x,y or z nothing?

Error message G0/G1: Insufficient axes homed

If I try and HOME I get a weblink reprapfirmware.org message - but can’t find a guide for this stage…

Any help/suggestion?

When I click Home X - I get this:

⟐ Answered March 13, 2021, 4:20 MST

⟐ Answered November 10, 2023, 2:17 MST

Hello, how to configure a second endstop on the second y-axis motor in order to properly ensure the geometry?

⟐ Edited by author August 16, 2023, 1:16 MST

Does it work like that?

I connect my XYZ Touch probe.

I start compensation process and move XYZ probe under my tool so when it touches probe, it will save it’s Z height on that spot and move to next point.

As a result i will have plane of different points with different heights so my engraver will know when to move up and down a bit to compensate.

⟐ Commented June 04, 2023, 3:35 MST

⟐ Answered September 11, 2022, 3:07 MST