Current version by: Tom van Eijmeren

Title:

My circles don't come out correctly

Text:

Hi,

I’m using vcarve to generate my toolpaths and UGS to power my workingbee. But my circles come out weird. Other shapes also come out weird. The vertical side is flat of the larger peace but it should be rounded.

I’m using a 6mm endmill. I’ve attachted some pictures of the toolpath and outcome.

Thanks in advance!

Tom

[image|4576]

[image|4573]

[image|4574]

[image|4575]

[image|4577]

Discussion Topic:

-Yes
+No

Status:

open

Edit by: Tom van Eijmeren

Title:

My circles don't come out correctly

Text:

Hi,
-I’m using vcarve to generate my toolpaths and UGS to power my workingbee. But my circles come out weird. Other shapes also come out weird.
+I’m using vcarve to generate my toolpaths and UGS to power my workingbee. But my circles come out weird. Other shapes also come out weird. The vertical side is flat of the larger peace but it should be rounded.
I’m using a 6mm endmill. I’ve attachted some pictures of the toolpath and outcome.
Thanks in advance!
Tom
[image|4576]
[image|4573]
[image|4574]
[image|4575]
[image|4577]

Discussion Topic:

Yes

Status:

open

Original post by: Tom van Eijmeren

Title:

My circles don't come out correctly

Text:

Hi,

I’m using vcarve to generate my toolpaths and UGS to power my workingbee. But my circles come out weird. Other shapes also come out weird.

I’m using a 6mm endmill. I’ve attachted some pictures of the toolpath and outcome.

Thanks in advance!

Tom

[image|4576]

[image|4573]

[image|4574]

[image|4575]

[image|4577]

Discussion Topic:

Yes

Status:

open