Skip to main content

v3.3

Minor Versionm

by Robert

  1. This guide is not for WorkBee Z1+ Owners. The Emergency Stop on the WorkBee Z1+ is pre-wired inline with the Power Supply.
    • This guide is not for WorkBee Z1+ Owners. The Emergency Stop on the WorkBee Z1+ is pre-wired inline with the Power Supply.

    • Wire the Emergency Stop into the Extruder 1 Stop input on the controller.

    • The two wires go into the outside pins, leaving the middle empty.

    • Polarity is not a concern.

  2. This will configure a Normally Closed Emergency Stop. For a Normally Open Stop proceed to Step 3.
    • This will configure a Normally Closed Emergency Stop. For a Normally Open Stop proceed to Step 3.

    • Under File Management > System click on 'config-user-settings.g'. Then add the following lines

    • ; Configure Software Emergency Stop

    • M950 J1 C"!e1stop" ; Configure Pin

    • M581 P1 T0 S0 ; Configure External Emergency Stop

    • M582 T0 ; Check External Trigger

    • Press Save.

    • Press the software emergency stop in the top right corner to restart the controller.

  3. This will configure a Normally Open Emergency Stop.
    • This will configure a Normally Open Emergency Stop.

    • Under File Management > System click on 'config-user-settings.g'. Then add the following lines

    • ; Configure Software Emergency Stop

    • M950 J1 C"e1stop" ; Configure Pin

    • M581 P1 T0 S0 ; Configure External Emergency Stop

    • M582 T0 ; Check External Trigger

    • Press Save.

    • Press the software emergency stop in the top right corner to restart the controller.

Conclusion

Thanks for following the guide. Any issues, please contact us!

12 other people completed this guide.

Ryan Lock

Member since: 04/11/2018

48,183 Reputation

22 Guides authored

14 Comments

Is there any instructions for emergency stop on x pro controller please

Carl Squire - Reply

Hi I’ve not ordered a duet on it’s own I’ve ordered a complete machine kit. Would this come with a spare connector or would I need to buy one ?

Wayne Elmore - Reply

Many thanks, looking forward to my delivery date.

Wayne Elmore -

Hi, the Duet box would still include lots of spare connectors.

Ryan Lock -

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 39

All Time: 6,083