Skip to main content
Editing Step 1 —

Step Type:

Drag to rearrange

If your limit switches are showing as 'Triggered' when they are not physically pressed, but change to triggered when pressed, please complete the steps below.

Under File Management > System open Config.g and Copy the Configure Endstops information.

Return back to System and open Customconfig.g and paste in the Lines as follows ; Configure Endstops M574 X2 Y2 Z2 S0. Changing the S1 to S0 to reflect NO Terminals or vice-versa.

Once complete, Press 'Save' and reboot by pressing the Emergency Stop Button.

You can have separate configurations for each axis by breaking each axis out onto it's own line. For example:

M574 X2 S0

M574 Y2 S1

M574 Z2 S0