Skip to main content
Help
Editing Step 7 —

Step Type:

Drag to rearrange

Locate your Touch Probe over the corner of the material, jog your machine until it is within the 'START HERE' Hole, roughly level with the surface of the Touch Probe. Connect your Endmill using the Clip.

Select the Work Coordinate you would like to probe in.

Select the Corner you want to probe in the Touch Probe Control Panel.

Define the Endmill Diameter in the Touch Probe Control Panel.

Press Probe Corner to begin probing your first corner.

Wait until the Probe Successful confirmation.

Unclip Probe and click Go to work XYZ Zero. Your Endmill should be perfectly aligned with the corner of your material.

Now the Probe can be detached from the Touch Probe Mount and stored safely.