Help
Rémi Duff
@duff
Rémi Duff
| 1 | Reputation |
|---|---|
| 0 | Solutions |
| 0 | Guides |
| Member Since 03/09/2022 | |
| 1 | Reputation |
|---|---|
| 0 | Solutions |
| 0 | Guides |
| Member Since 03/09/2022 | |
Hello Robert, Yes i have tried that adjusment. Apparently, so you know, with the Mafell PV Spindle, 0v = 4000 RPM no matter what. I guess i have to find a way around that issue. Thank You for your time.
Hello Paul, Have you found a way around this problem ? Everything works fine for me BUT indeed : the mafell does NOT stop. It keeps running at 4000 RPM.
Hello Team Ooznest. I own a new Workbee Z1+ and Mafell FM-100 PV. The spindle do not stop and keeps turning at minimum rate (4000 RPM) no matter what. Any idear about the “Q” Frequency setting involved ? I have tried 100 / 300 / 320 / 350 / 600 / 650 … how high does this goes ? Thank You.
Hello Team Ooznest. Under what circumstances should we change the "Touch Probe Trigger Level" (Active Low or Active High) in the Touch Probe Settings ? Does it have anything to do with the upside-down position of the probe when we probe a corner or a flat surface ? Thank You.
Hello Team Ooznest. Do we have to loose Clamping-Collars that are on the inside channel on BOTH sides of the axis (front and back) ? Or just the “front” ones as on photo 2 ? Thanks.