Salvadsor Rooijmans

HI, Im running into the problem that when I do a home all or home the Y-axias, that I can’t get the X-0axis to move. I do...

I found a solution. In the configs-axis.g file I changed the following: M669 K0 X1:0:0:0 Y0:1:0:1 Z0:0:1:0 to just M669 K0 Now the X-axes does what it is supposed to do after homing all axes. It is probably because my drive mapping is different than standard. Is it okay to just leave it like this or do I need to find the correct setting for M669?

Yes it does that. When homed it says triggered then when I move axes of the limit switch it changes to not triggered. When I just tested it the X axes moved for a couple of moves and then stopped responding again. the software does change the position value on screen. A bit weird right?

Hi Robert, Do you have any other thoughts on what might be causing this issue? I did not have this problem until I upgraded the firmware tor 3.3.

Hi Robert thanks for your reply. That’s one of the first things I checked. I hoped that, that was going to be it but all the limit switches work as they should.