wittrup

@wittrup

Answers

Answer to "Machine can't connect by ethernet cable" Mar 10, 2025
Similar problem was recently solved here. We had to put a dumb switch between our ISP (Internet Service Provider) switch/router and the Duet 2 controller. Even after the settings are verified correct removing the switch does not work. It seems the ISP equipment does not allow the NIC (Network Interface Card) configuration of the Duet 2. I would guess it has something to do with the MAC address being LAA (locally administered addresses) and the Vendor / UOI (organizationally unique identifier) not being known. In our case: Without me spending more time on that now.
Answer to "workbee z1+ ethernet wont connect" Mar 10, 2025
Similar problem was recently solved here. We had to put a dumb switch between our ISP (Internet Service Provider) switch/router and the Duet 2 controller. Even after the settings are verified correct removing the switch does not work. It seems the ISP equipment does not allow the NIC (Network Interface Card) configuration of the Duet 2. I would guess it has something to do with the MAC address being LAA (locally administered addresses) and the Vendor / UOI (organizationally unique identifier) not being known. In our case: Without me spending more time on that now.