Scott Rotton

Also in the larger versions there are more wheels to add which aren’t mentioned in where, 6 in total each side

OMG i just got half way through the build and found the is a left an right plate also, not mentioned and cost me literally hours or time, super annoy this instructions are bad

The difference is the larger hole next to the top where the square hole is is slight recessed, the larger part of the whole should be facing outwards away from the spindle area, it is used to hold a bearing in place later down the track to stop the lead screw hitting the frame, its extremely difficult to see from the pictures and should be highlighted in red for future revisions

If you get this wrong you will find in step 4 you have to start again pretty much, in step 4,3 you can see the image clearly where the bearing needs to slot in