Hi Ben,
Thanks for your message.
Please connect via USB in YAT.
Go to Terminal > Settings > Text Settings. Change EOL Sequence to <LF> and press Ok.
Run the command M122 in YAT.
In the report back there will be a line: 'WiFi signal strength'
Values in the range -30 to -50 are good, -50 to -60 is OK, -60 to -70 is marginal. Anything below -70 is weak and likely be unreliable.
If the signal strength is -60 or below you need to improve the strength where the machine is located or switch to access point mode.
Options include:
* A ***Wi-Fi*** signal ***booster*** extends ***WiFi*** network coverage space by boosting or amplifying existing signals. It enables all ***wireless*** devices within that expanded coverage space to connect to the ***internet*** or a similar ***wireless*** network. With a ***WiFi booster***, the ***wireless*** coverage will be boosted to cover larger areas of need.
* A ***Powerline adapter*** is a device that uses your homes electric wiring to transmit communications signals. The ***adapters*** (at least two) plug into your wall sockets and use Ethernet cables to connect to your router at one end and your device at the other.