Skip to main content

{{release_title}}

Minor Versionm

by Dozuki System

  1. Connect the Duet to your Mac with the USB cable provided. Do not connect other power supplies at this stage.
    • Connect the Duet to your Mac with the USB cable provided. Do not connect other power supplies at this stage.

  2. Mac OSX Users: Open Applications > Utilities > Terminal . Run ls /dev/tty.* Copy the result that has USB in the name. For example; /dev/tty.usbmodem1411 Run screen /dev/tty.usbmodem1411 115200. Replace "usbmodem1411" with the result you received. You should see a blank screen. Hit enter and you should see OK returned. You are connected successfully.
    • Mac OSX Users: Open Applications > Utilities > Terminal .

    • Run ls /dev/tty.* Copy the result that has USB in the name. For example; /dev/tty.usbmodem1411

    • Run screen /dev/tty.usbmodem1411 115200. Replace "usbmodem1411" with the result you received. You should see a blank screen. Hit enter and you should see OK returned. You are connected successfully.

    • If you get an error, Sorry, could not find a PTY. unplug the USB, plug it back in and try again.

  3. After the COM port has been configured, send command "M115" to the Duet board.
    • After the COM port has been configured, send command "M115" to the Duet board.

    • The Duet will return the firmware version being used confirming the connection to the Duet.

    • In all future guides when double quotation marks are being used, use straight quotation marks, These can be set in the System Preferences -> Keyboard on your Mac.

Conclusion

Thanks for following the guide. Any issues, please contact us!

4 other people completed this guide.

Robert

Member since: 12/03/2018

22,144 Reputation

104 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 850