8. Assemble Router Mount

On the outer most holes on the Router-Mount attach 4 x Angle-Corners using 4 x M5- Low-Profile-10mm Bolts.

Make sure the angle corners are flush with the back of the Router-Mount.

Attach the Router-Mount to the Z-Axis extrusions using 4 x M5-Low-Profile-8mm Bolts and 4 x M5-Drop-In-Tee-Nuts.

Make sure the Router-Mount is perpendicular to the extrusion.

The Router-Mount position depends on what jobs you are planning to do, however 1/3 of the way up the extrusion is a good position for normal work.

Clamp the router inside the Router-Mount using the front plate and two M5-Low-Profile- 20mm Bolts.