Will Durcan

Hi - when I upload a job, the first couple of passes are often not engaging with the material surface I’d like to cut. I’m...

Hi - I’ve set up a job in Vcarve pro, where most of the area can be cleared with the 1/8 end mill. The software then...

I wanted to ask if anyone here would willing to provide a morning or so of training? I bought my workbee several months...

Indeed - thank you as ever for your help.

Thank you Tezza. Believe me, I’ve checked out many tutorials on the net. Some of it is ace; some of it isn’t. As you and the Ooznest team are acutely aware: I am indeed very new to CNC. So far, I haven’t quite found the answer I was looking for. Having since had a chance to play around a little more with VCarve, I can see that the availability of multiple toolpaths can be saved as a variety of GCodes or as one GCode. In turn, I see now that my question wasn’t as clear as it could have been. I was interested to know what would happen in the case of me saving multiple toolpaths to one GCode - especially when there are different tools for each tool path. If I were to upload a GCode made up of different toolpaths, does the Machine just plough through each tool path - or does it pause at any point - thereby giving me the chance to change the tool if needs be? I hope that that sets out my question a bit better Thank you Will

heya - thanks for coming back to me. I’m in London - toward Greenwich. if you happen to be nearby, it would be ace if you’d be happy with meeting up. otherwise, I’d be very happy to come to You. Whereabouts in the country are you?