Mark Williams

Have I built my workbee incorrectly? The Eccentric-Spacers on my Y carriages are at the bottom. After fixing my CNC to the bench, they are almost impossible to access.

My slot cover supplied was 1000mm, however I have the 1000mm by 750mm workbee, so I had to cut off more than 50mm.

Thanks Robert

When do we tighten the Nut-Blocks from Assembly 2, step 01 and Assembly 3, step 4?

When do we tighten the Nut-Blocks on the Y-Carriage?

”M5-Button-Head-Bolt-8mm” are called “Low Profile - M5 - 8mm” on the bag in the box. I think (cross fingers).

”M5-Button-Head-Bolt-8mm” are called “Low Profile - M5 - 8mm” on the bag in the box. I think (cross fingers).

I’m not complaining, just trying to be productive.

Would be really helpful if the instruction description matched the name of the parts on the bags.

”M5-Button-Head-Bolt-8mm” are called “Low Profile - M5 - 8mm” on the bag in the box. I think (cross fingers).