Talfryn

hello my use time with the workbee is increasing steadily, I have a quick question, when using the touch probe does it...

After months building I am now setting up first job. So step by step I am going through the first project tutorial. I have...

i forgot to mention both apple devices were using safari

Hello Robert, Yes i am using chrome, i cant find any button in chrome settings for 'Use Hardware accel...' it doesn't seem to exist on my android tablet but following your thinking i tried other browsers, MS Edge and Firefox they didn't show the toolpaths either on the android tablets...I tried NC viewer on the android tablet to view a GCode copy on the hard drive and everything was visible... Then just to verify things i tried to view the toolpaths through safari on my iPhone and the same problem no toolpaths. Eventually i tested on several devices... Android13 tablet - No toolpaths Iphone ios 17.1.2 - No tool paths Ipad ios 12.5.7 - Toolpaths shown I tried both individually and with all connected at same time to duet this made no difference. So the only thing which works is the Ipad running an old ios12.5.7

First amended question didn’t work so here goes again..... Found the problem, it seems to be the android tablet I was using for the controller interface. When I connected my iPad the tool paths miraculously appeared. I am using a cheap android table in the workshop as I am not happy to have an expensive iPad in that environment. The android tablet I have been using is a Facetel Q6-EEA running android 13 . Is this a known issue and is there a resolution/workaround? I reallly don’t want my iPad in such a dusty shop :)