Jolybob

So have cut my test file and indeed a second file from Sketchup via Cut2d. This flagged that my Spoiler board is not true...

Hi All!, So I have now built my z1 1500x1500. Great guides- very easy to follow. Only hit three snags- Tensioning (no idea...

Unsure where you mean? As you will know from my whatapp i dont have access to workbee local- as the wifi seems broken. I can email you the gcode that was outputted by CUT2D Pro

; vectric post revision ; 2f9399b99bb07c394afbb004e9c7f6ea t1 g17 g21 g90 g0z20.320 g0x0.000y0.000 m3p0s12000 g0x627.700y-602.700 g0z5.080 g1z0.000f762.0 g1y-545.100z-0.750 g1y-602.700z-1.500 g1y602.700f2540.0 g1x-627.700 g1y-602.700 g1x627.700 g0z5.080 g0x625.412y-600.412 g1z0.000f762.0 g1x567.812z-0.750 g1x625.412z-1.500 g1x-625.412f2540.0 g1y-588.972 g1x625.412 g1y-577.532 g1x-625.412 g1y-566.092 g1x625.412 g1y-554.652 g1x-625.412 g1y-543.212 g1x625.412 g1y-531.772 g1x-625.412 g1y-520.332 g1x625.412 g1y-508.892 g1x-625.412 g1y-497.452 g1x625.412 g1y-486.012 g1x-625.412 g1y-474.572 g1x625.412 g1y-463.132 g1x-625.412 g1y-451.692 g1x625.412 g1y-440.252 g1x-625.412 g1y-428.812 g1x625.412 g1y-417.372 g1x-625.412 g1y-405.932 g1x625.412 g1y-394.492 g1x-625.412 g1y-383.052 g1x625.412 g1y-371.612 g1x-625.412 g1y-360.172 g1x625.412 g1y-348.732 g1x-625.412 g1y-337.292 g1x625.412 g1y-325.852 g1x-625.412 g1y-314.412 g1x625.412 g1y-302.972 g1x-625.412 g1y-291.532 g1x625.412 g1y-280.092 g1x-625.412 g1y-268.652...

HI- Thanks have retried and same issue. Machine head to bottom right .starts for about 5cm then stops. Can i upload the g code for you to look at?