Noisy y axis back to front
Workbee is starting to make a noise moving along Y axis back to front and front to back. How can I stop this, sounds like a vibration.
Is this a good question?
Score
0
1172
1 Answer
Hi Andrew!
It sounds like the vibration is coming from loose wheels, belts, or screws. Please check the wheel tension, belt tightness, and tighten all screws. A bit of lube on lead screws can help too.
If it’s still happening, feel free to contact us at https://ooznest.co.uk/help/ and we're happy to assist you further.
Was this answer helpful?
Score
0
what kind of lube do you guys advise for lead screws???
We recommend a dry PTFE for the lead screw and Super Lube Synthetic grease to use on the bearings.
