Skip to main content
Discussion Topic
User avatar

Duet Wifi Server Issue

Hi all

Having some issues with a Duet Wifi board, specifically the web control panel has ceased to function (connection constantly being lost, and sometimes the page will not load). My machine has been working fine for about the last year or so and nothing has changed wrt its setup location/networking arrangements.

Wondering if anyone has seen this issue before? I have tried setting it up to provide an access point. Although while it creates a network which I can connect to with good SNR, and I can ping the router IP, the control page still won't open.

Any pointers would be greatly appreciated! in the middle of a slightly time critical task atm.. eeep!

Cheers,

Sean

Reply to discussion Subscribe to discussion

Is this a worthwhile discussion?

Score 1
Add a comment

1 Reply

Most Helpful Answer
User avatar

Hi Sean,

On your wifi network can you get connected even for a short period?

If so in the console run the command M122.

In the report back there will be a line: 'WiFi signal strength'

Values in the range -30 to -50 are good, -50 to -60 is OK, -60 to -70 is marginal. Anything below -70 is weak and likely be unreliable.

If the signal strength is -60 or below you need to improve the strength where the machine is located or switch to access point mode.

Robert

Was this reply helpful?

Score 1
Add a comment

Join the discussion

Author avatar Sean Malikides will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 4

All Time: 110