Skip to main content
User avatar

AMB Kress Milling Motor Mounting

I need help - has anybody fitted an AMB Kress Milling Motor to the Workbee.

I have the all the bits necessary (adaptor ring etc) but am unsure at what height to mount it on the Z axis extrusion.

Any other advice on the process would be most helpful.

Thanks

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution
User avatar

Hi James,

Thanks for your question.

You should mount it so the bottom of the collet, is flush with the bottom of the Z-Axis. That will maximise your working Z Depth.

Robert

Was this answer helpful?

Score 1

Comments:

Thanks - I need all the helpI can get!!

by

Add a comment

Add your answer

Author avatar James will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 49