Machine bed size upgraded but how do I increase it in the software?
Hi I have increased the bed size of my machine but the software still thinks it is the same size. How do i change it please ?
Is this a good question?
Hi I have increased the bed size of my machine but the software still thinks it is the same size. How do i change it please ?
Is this a good question?
Hi Sean,
Thanks for your message.
You need to adjust the dimensions in your homeall.g, homex.g, etc files.
Best Regards
Robert
Was this answer helpful?
My 1500x1500 machine only moves 500x500 from homing spot. Do I change this the same way?
Also is there a tutorial or more info on how to do this? I don't want to change anything important accidentally.
Hi Ben,
Copy this line to customconfig.g
And change it accordingly: M208 X1300 Y1270 Z94 S0 ; Set axis maxima
Then inside homeall.g, homex.g, homey.g, and homez.g.
On every line which starts with G92
Change the maximums accordingly.
Best Regards
Robert
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 1
All Time: 57