G Code error code

Hi. When i try to cut from a file that i have made in Vcarve Pro i get the following error

1/09/2023, 16:00:21: Connected to 192.168.251.2

11/09/2023, 16:01:09: Upload of MOSSIDE2.crv successful after 2s

11/09/2023, 16:01:10: M32 "0:/gcodes/MOSSIDE2.crv": File 0:/gcodes/MOSSIDE2.crv selected for printing

Error: Bad command: [0x11]ࡱ[0x1a]

Error: Bad command: >

Error: Bad command: [0x03]

Error: Bad command: [0x09]

Error: Bad command: [0x06]

Error: Bad command: [0x01]

Error: Bad command: [0x10]

Error: Bad command: [0x02]

Error: Bad command: [0x01]

Error: Bad command:

Error: Bad command:

Error: Bad command:

Error: Bad command: z[0x01]

Error: Bad command: [0x01]

Error: Bad command: |[0x02]

Error: Bad command: [0x02]

Error: Bad command: ~[0x03]

Error: Bad command: [0x03]

Error: Bad command: ][0x04]

Error: Bad command: [0x04]

Error: Bad command: [0x06]

Error: in GCode file line 86 column 201: GCode command too long

Cancelled printing file 0:/gcodes/MOSSIDE2.crv, print time was 0h 0m