G0/G1: Target Position outside machine limits.

Question

Rep: 1

Posted: Oct 3, 2023

Options

G0/G1: Target Position outside machine limits.

Ooznest Z1 Workbee

I am getting this error - previously all seemed to be well. Machine homes fine. I tried using an old gcode file and setting machine in centre of the bed but still same issue.

Do I need to go back to any calibration and reset anything?

Hoping you can help

Allen

Answer this question I have this problem too

Is this a good question?

Yes No

Score 0

Add a comment

1 Answer

Kimberley Rep: 151 · Answer 1 · 2023-10-03T07:31:33-07:00

Hi Allen,

Thanks for your message.
Sorry to hear about the issues you are having. If you go to Control > Console you can see the full error.

We have made a guide on solving the Outside Machine Limits error here: Outside Machine Limits Troubleshooting

Give that a read and let me know if it does not solve your issue.

(Please note if you have an M3 error, this error is not the reason why your job is not running. The M3 error is just trying to set the speed on a spindle. But with the WorkBee we use manual speed control router heads.)

G0/G1: Target Position outside machine limits.

1 Answer

Add your answer