Skip to main content

{{release_title}}

Minor Versionm

by Dozuki System

  1. We recommend that you read through the whole manual before beginning the build, as this enables you to get a rough idea of how it all goes together.
    • We recommend that you read through the whole manual before beginning the build, as this enables you to get a rough idea of how it all goes together.

    • Work through all categories and guides in numerical order. If a category or guide has the same number, you only need to complete one of them based on the machine you bought or assembly preference.

    • Before starting each step make sure you have studied the diagram and fully understand what you are doing.

    • When attaching parts, make sure they are properly squared and aligned, and everything should easily fit together. If a part is requiring significant force to attach, stop, take it off, re-read the instructions, and try again. Do not over tighten bolts, as you may strip the threads.

    • If you forget to insert a Tee-Nut when instructed, there is no need to undo any of the work you have done. We have included spare M5-Drop-In-Tee-Nuts in the kit for this situation.

    • M5-Drop-In-Tee-Nuts do not have to be inserted from the end of the extrusion - simply place them in the V-Slot, then screw in the bolt. This will turn them, and engage them into the underside of the V-Slot.

    • This manual has been written for the construction of a 750 x 750mm screw driven version of the WorkBee.

  2. Please use the table to identify your extrusions checking the colour of Anodise against the list along with Quantity (Number) and also Tapping (T)
    • Please use the table to identify your extrusions checking the colour of Anodise against the list along with Quantity (Number) and also Tapping (T)

    • This manual has been written for the construction of a 750 x 750mm screw driven version of the WorkBee.

    • If you have a larger version, everything is exactly the same, except you will be working with longer V-Slot extrusions and ACME Lead screws.

    • Use the table to convert V-Slot dimensions in this manual to the sizes for your machine.

Conclusion

Before you get into the build, we just wanted to thank you for purchasing one of The Ooznest Original WorkBee CNC Machines! We hope you enjoy this journey and we're here to help you every step of the way! Without further ado, let's get started!

49 other people completed this guide.

Robert

Member since: 12/03/2018

23,127 Reputation

104 Guides authored

One Comment

Not too sure what to do next……..

William Walshaw - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 10

All Time: 2,829