-
-
With a Precision-Shim in between, insert a 625-2RS-Bearing into either side of the Solid-V-Wheel-Xtreme.
-
Repeat this for 30 Solid-V-Wheel-Xtreme's. 31 wheels are provided, do not assemble the spare one, these can be used for parts if any of the other packets are missing anything.
-
There is one spare Solid-V-Wheel-Xtreme, do not assemble this one.
-
Cancel: I did not complete this guide.
44 other people completed this guide.
4 Comments
Everything is well packed and labeled :-)
There are no shims/spacers in my wheels box, should there have been? And one of my bearings has the black ring missing from one side, is this going to be needed?
You might want to rephrase or remove “There will be 30 x Precision-Shims left over from the Solid-V-Wheel-Xtreme-Kits, these can be added to the Precision-Shim packet in the ‘Brackets & Spacers’ box for use later“, since that would seem to not be correct for the v2.2 build. That would save the confusion
Hello Raymond. The shims are in the bracket and spacers box. There is spare bearings provided. Best Regards
