Skip to main content

v1.2

Minor Versionm

by Robert

  1. With a Precision-Shim in between, insert a 625-2RS-Bearing into either side of the Solid-V-Wheel-Xtreme.
    • With a Precision-Shim in between, insert a 625-2RS-Bearing into either side of the Solid-V-Wheel-Xtreme.

    • Repeat this for 30 Solid-V-Wheel-Xtreme's. 31 wheels are provided, do not assemble the spare one, these can be used for parts if any of the other packets are missing anything.

    • There is one spare Solid-V-Wheel-Xtreme, do not assemble this one.

Finish Line

44 other people completed this guide.

Ryan Christy

Member since: 10/31/2018

19,971 Reputation

100 Guides authored

4 Comments

There are no shims/spacers in my wheels box, should there have been? And one of my bearings has the black ring missing from one side, is this going to be needed?

Raymond Stone - Reply

Hello Raymond. The shims are in the bracket and spacers box. There is spare bearings provided. Best Regards

Ryan Lock -

You might want to rephrase or remove “There will be 30 x Precision-Shims left over from the Solid-V-Wheel-Xtreme-Kits, these can be added to the Precision-Shim packet in the ‘Brackets & Spacers’ box for use later“, since that would seem to not be correct for the v2.2 build. That would save the confusion

Raymond Stone -

Everything is well packed and labeled :-)

Gregory Van der Auwera - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 9

All Time: 1,973