3. Power Supply Assembly

Identify which Power Supply you have by the Kit Box it has been packaged in and follow the relevant Step either 2 or 3.

Only follow this Step if you have the Power Supply Kit

Please complete this PDF Here: https://ooznest.co.uk/wp-content/uploads...

This guide is a PDF.

Use the red switch on the side select the input voltage for your local power.

Only follow this Step if you have the Pre-Assembled Power Supply

At this stage your PSU-Output-Power-Cable will be inserted inside the Y-Axis Drag Chain.

Place the Power Supply at the Rear of the WorkBee CNC Machine next to this cable.

Plug the PSU-Output-Power-Cable into the female connector on the Pre-Assembled Power Supply.

Plug the mains cable into the IEC Inlet on the Pre-Assembled Power Supply.

Use the red switch on the side select the input voltage for your local power.