Skip to main content

v1.4

Minor Versionm

by Robert

  1. Use the red switch on the side, select the input voltage for your local power. Place the power supply in an appropriate location for your needs. Plug the PSU Output Power Cable into the female connector on the Pre-Assembled Power Supply.
    • Use the red switch on the side, select the input voltage for your local power.

    • Place the power supply in an appropriate location for your needs.

    • Plug the PSU Output Power Cable into the female connector on the Pre-Assembled Power Supply.

    • Connector the other end of the PSU Output Power Cable to your controller.

    • Plug the mains cable into the IEC Inlet on the Pre-Assembled Power Supply.

    • Plug the other end of the mains cable into your wall socket

    • Use the switch on the side of power supply to turn the power supply on.

    • Adjust the potentiometer to adjust the voltage.

Conclusion

Thanks for following the guide. Any issues, please contact us!

4 other people completed this guide.

Ryan Lock

Member since: 04/11/2018

48,183 Reputation

22 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 1,051