/
EN
/

Site Navigation

Your Account

Choose Language

How To Invert Limit Switches

Written By: Ryan Lock
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

1

Time Required

Suggest a time??

Sections

1

Flags

0

  1. If your limit switches are showing as 'Triggered' when they are not physically pressed, but change to triggered when pressed, please complete the steps below. Under File Management > System open Config.g and Copy the Configure Endstops information.

    • If your limit switches are showing as 'Triggered' when they are not physically pressed, but change to triggered when pressed, please complete the steps below.

    • Under File Management > System open Config.g and Copy the Configure Endstops information.

    • Return back to System and open Customconfig.g and paste in the Lines as follows ; Configure Endstops M574 X2 Y2 Z2 S0. Changing the S1 to S0 to reflect NO Terminals or vice-versa.

    • Once complete, Press 'Save' and reboot by pressing the Emergency Stop Button.

    • You can have separate configurations for each axis by breaking each axis out onto it's own line. For example:

    • M574 X2 S0

    • M574 Y2 S1

    • M574 Z2 S0

Conclusion

Thanks for following the guide. Any issues, please contact us!

Author

Ryan Lock

Member since: 04/11/2018

45,353 Reputation

23 Guides authored

0 Comments

Add a comment

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 7

Past 30 Days: 27

All Time: 481