Hi, the link to the pronged tee nut system says the following:
Files are no longer available for this project due to different size Pronged Tee Nuts and Endmills being used in the Video causing issues when made physically.
- May I ask what's the recommended pronged tee nuts to use in the 18mm MDF? Is it M5?
- Also, what's the recommended depth on the back of the spoilerboard to make sure the pronged tee is flat? is it about 2mm?
The M5-Low-Profile-30mm doesn’t come in the hardware box, I have a M5 - Button - Head - Bolt 30mm can I use these ones for Step 1 Z wheels, first bullet point?
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Hi, I downloaded Cut2D Pro to create the grid to insert the pronged tees, however the free trial doesn't allow to download the toolpath.
I'm a bit stock as different softwares offer trial sample files but to do this I need to set up my spoilerboard.
Would you, by any chance have a toolpath for the grid of pronged tees for a 1500 x 15000 spoilerboard I could try ? Thank you!
Hi, the link to the pronged tee nut system says the following:
- May I ask what's the recommended pronged tee nuts to use in the 18mm MDF? Is it M5?
- Also, what's the recommended depth on the back of the spoilerboard to make sure the pronged tee is flat? is it about 2mm?
Thank you!
The M5-Low-Profile-30mm doesn’t come in the hardware box, I have a M5 - Button - Head - Bolt 30mm can I use these ones for Step 1 Z wheels, first bullet point?