Help
Joe Johnson
@jarjohnson
Joe Johnson
| 1 | Reputation |
|---|---|
| 0 | Solutions |
| 0 | Guides |
| Member Since 01/29/2020 | |
| 1 | Reputation |
|---|---|
| 0 | Solutions |
| 0 | Guides |
| Member Since 01/29/2020 | |
You have probably figured this out by now but its not the Z acme-screw you should be using,, thats for the Z axis.. so you only need one of those. The Y-acme screws are the longer ones. the diagram is just showing a section of the screw to illustrate where it goes! My machine is 1500 x 1500mm so the 3 longer ACME screws weren’t labelled as they are all the same size!