Olivier Dessy

I made a mistake at this part, using 8mm Lock-Clamping-Collar instead of Lock-Collar. They are not the same size and it was causing stuck on Z axis later.

A very good thing that is mentioned to fix the limit switch now !

I also made a mistake sticking the limit switch cable, have a look at routing wire page to clarify the better way to orient it.

As Adam mentioned, i used the Drag Chain to run the router power cord, through X-Drag-chain and Y-Drag-Chain.

Don’t forget to feed the Z probe cable, and i also feed the Laser cable attached next to the router.

Strange that PSU is just placed on table, it is not fixed at the machine ?

15mm is way too long, as Jonathan said, i put the screw reversed (pointed down), seems to be better for passing cable on it.

I used a 15mm screw instead of 20mm for the “hidden” screw and an allen key do the job.