User avatar

Options

Problem with wifi duet connection and sd card

Hi, I hope you can help. I have an original workbee Z1 screw drive with duet wifi and connection as an access point. This has always been trouble free. But recently a job halted halfway through a cut and disconnected from the workbee.

I have not been able to reconnect since this issue. After doing some checks via yat terminal it turns out the duet could not read from the sd card. I formatted the card and placed the workbee duet server.bin firmware file in the firmware folder and ran M997 S1 to reload the original configuration to the machine as recommended in a previous poster's issue but it said the file could not be read (it is in the correct location and correct filename).

Is there a way to download the complete sd card folder structure and contents from ooznest?

Thank you for any help.

Jeff Jones

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Chosen Solution
User avatar

Options

Hi Jeff,

At the top of this page here you can download the full SD Card Images: WorkBee Firmware Releases

Do that and see if that helps

Was this answer helpful?

Yes No
Score 1
Add a comment
User avatar

Options

Thank you. I downloaded the image and, after getting the flashing ui conntrol issues I followerd the guide to install all parts of the firmware updates followed by the webcontrol software updates. All good now.

One thing I would suggest is placing more prominence on the fact that the sd image is on this page (perhaps at the top of the page rather than in a small part of the table), I missed it the three times I looked previously. Could be my ageing eyes though...

Many thanks for your help.

Jeff

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Author avatar Jeff will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 15

All Time: 32