WorkBee Firmware Releases
Latest Version
Below is the latest firmware version for the WorkBee CNC Machine. If you are installing a new WorkBee please download this version.
If you are updating from version 1.0.6 or older please follow this guide Connecting, Updating and Configuring Your WorkBee
If you are updating from version 1.0.7 or greater please follow this guide Updating WorkBee Firmware
| Version | Full Download | Date |
|---|---|---|
| 1.0.7 | WorkBee-Firmware-v1.0.7 | 01/11/2019 |
All Versions
The below table lists all the firmware releases for the WorkBee CNC Machine.
The following items makeup the firmware and control for the WorkBee CNC Machine:
- Duet2CombinedFirmware
- DuetWifiServer (If applicable)
- WorkBeeControl
- System-Settings
When updating from a previous version, you can download from the column named 'Update Download'. This download only includes the files which have been changed from the previous version. These are the only files which need updating. This column can only be used if coming from a previous version in chronological order, for example 1.0.5 > 1.0.6.
| Version | Full Download | Update Download | Date | Release Notes | Installation Notes |
|---|---|---|---|---|---|
| 1.0 | WorkBee-Firmware-v1.0 | N/A | 06/12/2018 | Latest Release of Duet Firmware & Web Control. Configuration for WorkBee CNC Machine set. Work coordinate control added. Pause/Resume buttons function fixed for Work coordinates. | |
| 1.0.1 | WorkBee-Firmware-v1.0.1 | N/A | 06/12/2018 | Removed WifiServer from system settings. | |
| 1.0.2 | WorkBee-Firmware-v1.0.2 | N/A | 16/01/2019 | Added XYZ Touch Probe functions. | |
| 1.0.3 | WorkBee-Firmware-v1.0.3 | N/A | 12/03/2019 | Fixed Duet Wifi access point mode bug. By default, the machine now has to be homed before movement can occur. | |
| 1.0.4 | WorkBee-Firmware-v1.0.4 | N/A | 08/05/2019 | - Removed error when homing Z - Set the machine to CNC Mode with M453 - Fixed Return To Work Zero to work correctly with M453 - G0 is now treated as a rapid move, G1 as a controlled move - Add G21 to homing commands to make sure machine is in mm - Fixed homing files to remove restricted movement due to steps/mm rounding | If updating from a previous firmware version, please complete the following manual as there is an extra step Connecting, Updating and Configuring Your WorkBee |
| 1.0.5 | WorkBee-Firmware-v1.0.5 | N/A | 06/06/2019 | - Change movement commands to use H instead of S - Fixed bug in Homez.g - Power Loss Resume has been configured - A touch probe can now be setup on any spare extruder endstop and trigger level changed | If updating from a previous firmware version, please complete the following manual as there is an extra step Connecting, Updating and Configuring Your WorkBee |
| 1.0.6 | WorkBee-Firmware-v1.0.6 | WorkBee-Firmware-v1.0.6-Update | 25/06/2019 | - Fixed homing files to prevent max limit error while homing. | Update files now available. This download only includes what has been changed to reduce update time. Don't forget to re-configure Step 7 of Connecting, Updating and Configuring Your WorkBee. |
| 1.0.7 | WorkBee-Firmware-v1.0.7 | WorkBee-Firmware-v1.0.7-Update | 01/11/2019 | Added – workzero.g Runs when Go To Work Zero is pressed. Added - customconfig.g for custom settings instead of editing config.g Changed - Interface now WorkBee Control Changed – Comments on homeall.g, homex.g, homey.g, homez.g, Changed – Resume.g to work with multiple work coordinates Changed – Reformatted Config.g Removed - Obsolete Macros Removed – Commands from bed.g | If you are updating from version 1.0.6 or older please follow this guide Connecting, Updating and Configuring Your WorkBee |
Beta Versions
Below is our latest Beta version of the WorkBee Firmware. Use this firmware at your own risk. Ooznest accept no liability whatsoever for anything which goes wrong when installing and using this firmware. We will not offer any formal customer support to users who are using this firmware, and will request the user to change to the latest stable version before proceeding with support.
Post Processors
Fusion360
| Version | Download | Date | Release Notes |
|---|---|---|---|
| 1.0 | Fusion-v1.0 | 06/12/2018 | |
| 1.0.1 | Fusion-v1.0.1 | 13/02/2019 | Enabled true arcs |
Use this link for an in-depth guide on installing a Post Processor - https://knowledge.autodesk.com/support/f...
Vectric
For all Vectric Products use GRBL (mm) (*.g-code)
47 Comments
I have just tried to upload the latest firmware, did the first two files OK but now I don’t have the upload file button. I have tried applying the update, not change, so tried restoring the factory defaults, still no upload file button.
I have been getting G2/G3 errors, thats why I came looking for any firmware updates
Dave Laker - Reply
Hi Dave,
That is strange the button has disappeared, can you send some screenshots to sales@ooznest.co.uk?
Best Regards
Ryan Lock
Ryan Lock -
Hi Dave,
I ran into a similar problem. When you have the browser screen at a lower resolution, ie split screen, the upload button disappears. Try full screen or higher resolution.
Hope it helps,
Mauro
Mauro - Reply
Hi, I just updated the machine, but lost all my settings. Like steps per mm and the connectivity to the devise. Might be good to add a note about this in the tutorial.
Alexander
Emergo Designs
Alexander bol - Reply
Your Youtube video regarding setting up a wireless access point states the need for version 1.0.4 for the firmware. There is no version 1.0.4 at present. Im assuming 1.0.3 will be OK.
Cheers
Colin
Colin Kent - Reply