Skip to main content

g0/g1 insufficient axes homed

Just finished building 1500x1500 oosnest. Ethernet connected and Duet interface aok via a web browser.

Updated software etc

Disabled jog with M564 S1 H0 in customconfig.g etc but when try to jog x,y or z nothing?

Error message G0/G1: Insufficient axes homed

If I try and HOME I get a weblink reprapfirmware.org message - but can’t find a guide for this stage…


Any help/suggestion?

Update (12/14/2020)

When I click Home X - I get this:

Block Image

Answer this question I have this problem too

Is this a good question?

Score 1

Comments:

Forgot to say - latest Firmware installed during setup

by

Add a comment

3 Answers

did you click save when you edited customconfig.g ?

Was this answer helpful?

Score 0

Comments:

Yes, saved the customconfig.g file

by

Add a comment

Hi,

If we can get a screenshot of the weblink reprapfirmware.org message that would be great.

Best Regards

Ryan Lock

Was this answer helpful?

Score 0

Comments:

Will I just post the screenshots into the 'Add your Answer' area?

by

Images added in updated info

by

@euee72 Hi, thanks. Under File Management > System > Is there a homeall.g, homex.g, homey.g and homez.g files?

by

Hiya, yes I have all those 4 files and a homedelta.g file. The homedelta.g has an older date stamp on it. The rest are dated 6th Dec

The homedelta.g file has the line of code: M117 Use https://configurator.reprapfirmware.org/

by

Hi,

Ok, do all your limit switches work as per this step: 4. Testing Your WorkBee

Best Regards

Ryan Lock

by

Show 4 more comments

Add a comment

Euan - just wondered how this issue was resolved - have the same problem? Many thanks Robin

Was this answer helpful?

Score 0
Add a comment

Add your answer

Euan will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 19

All Time: 216