User avatar

Options

projects starts really too big comparted gcode size and 0 shifts

Hi everybody,

i’m a noob but i try to launch the ooznest test gcode here First Project

problem 1: the size is absolutely too big and wrong compared the gcode

problem2: before sending gcode, i set work XYZ but when i launch it, it shifts from 0 before beginning (always up/right)

If someone can help me…

Thanks;)

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
User avatar

Options

Hi Pierre,

Thanks for your email.

Sounds like your steps/mm is not set correctly. Can you go to Settings > Machine Specific, and tell me what your Steps/mm are set to please?

Was this answer helpful?

Yes No
Score 0

Comments:

Thanks for reply, all steps/mm are 400

by

Add a comment
User avatar

Options

Thanks for reply, all steps/mm are 400

Was this answer helpful?

Yes No
Score 0

Comments:

maybe a good information : my workbee 1500x1500 is a belt driven machine

by

Hi Pierre,

That is why, have you recently completed this guide: How To Update WorkBee Firmware V1.0.7 > V3.3.0-1.2

Robert

by

yes, now steps are ok but i have a Y drive problem ( movement where ok with the bad belt&screw config previously uploaded)

I have Belt config uploaded and this new problem appears...

https://youtu.be/IlV_HpXvlSA

already try to invert movements in drive config but nothing... :(

by

@piotr1986 If you disconnect the Flexible Couplers from the Lead Screws, then try and move the Y-Axis do they spin freely?

by

Yes when machine is off Y is free as a bird

by

Show 1 more comment

Add a comment

Add your answer

Author avatar pierre lippert will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 84