User avatar

Options

Rebuild SD card / no wifi connection

I went through the steps to upgrade my Firmware to the latest and got into a thorough mess. I think I got to step 8 or thereabouts OK but then all went pear shaped.

RepRap Firmware is as folllows -

m122

Diagnostics

RepRapFirmware for Duet 2 WiFi/Ethernet version 3.3 (2021-06-15 21:44:54) running on Duet WiFi 1.02 or later

Board ID: 0JD0M-9P6B2-NJ4S4-6J9F8-3SD6P-TV1UL

but as I cannot get a WiFi connection I tried to instal files directly to the SD card.

This has led to just endless attempts to get the WiFi to connect unsuccessfully.

Is there a simple way to copy the right / up to date files to the SD card directly or what do you recommend.

Many thanks.

Richard

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0

Comments:

I found this prior answer Robert but the link provided is expired.

Seems like just what i need !

by

Hi Brian,

Download this zip: https://we.tl/t-VSUzQibMN0

Extract the contents, and then put the contents on a blank SD Card.

These are the files for a 750x750 Wifi WorkBee running a similar firmware version to you.

by

Hi Richard,

Can you connect via USB and send the command M408 S5, then paste back the result to me?

by

Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
User avatar

Options

Thanks Robert - here it is

m408 s5

{“axisMins”:[0.00,0.00,0.00],”axisMaxes”:[200.00,200.00,200.00],”accelerations”:[500.00,500.00,20.00,500.00,500.00,500.00,500.00,500.00,500.00,500.00,250.00,250.00],”currents”:[0,0,0,0,0,0,0,0,0,0,0,0],”firmwareElectronics”:”Duet WiFi 1.02 or later”,”firmwareName”:”RepRapFirmware for Duet 2 WiFi/Ethernet”,”firmwareVersion”:”3.3”,”dwsVersion”:”(unknown)”,”firmwareDate”:”2021-06-15”, “sysdir”:”0:/sys/“,”idleCurrentFactor”:30.0,”idleTimeout”:30.0,”minFeedrates”:[15.00,15.00,0.20,15.00,15.00,15.00,15.00,15.00,15.00,15.00,2.00,2.00],”maxFeedrates”:[100.00,100.00,5.00,100.00,100.00,100.00,100.00,100.00,100.00,100.00,20.00,20.00]}

ok

Was this answer helpful?

Yes No
Score 0
Add a comment
User avatar

Options

Hi,

Can you please complete the following steps:

- Turn off the controller and disconnect via USB

- Remove the SD Card from your controller and put it into your computer.

- Check if there is a folder called 'firmware' if not create a folder called 'firmware'

- Download and extract https://ooznest.co.uk/wp-content/uploads...

- Put the file named DuetWifiServer.bin into the 'firmware' folder.

- Eject the SD Card and put it back into the controller

- Connect via USB

- Send the Command M552 S0

- Wait 10 seconds

- Send the Command M997 S1

- Wait until the installation is finished

- Disconnect via USB

- Turn on Mains Power

- You should be able to connect as normal

- Proceed with the guide from Step 9 How To Update WorkBee Firmware V1.0.7 > V3.3.0-1.2

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Author avatar Richard Hicks will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 6

All Time: 153