Wifi connected machine constantly disconnects and reconnects every second on repeat This makes it unusable.. This started happening after updating the firmware, please can someone help fix this issue.
Many thanks,
Sam
Is this a good question?
The most likely cause of the flickering is something has not been completed correctly from Steps 1-8. So you are on the latest version WorkBee Control, but still on the old firmware on the board.
We need to revert your WorkBee Control so you can start the firmware update guide again.
Please follow these steps:
- Turn off the machine
- Remove the SD Card
- Delete the www folder
- Download and extract this www folder: https://ooznest.co.uk/wp-content/uploads...
- Put the extracted www folder onto the SD Card
- Insert the SD Card back into the controller
- Turn the machine on
- Open WorkBee Control
- Start the update firmware guide again: How To Update WorkBee Firmware V1.0.7 > V3.3.0-1.2
- Make sure you follow every step carefully and fully as there are checks to make sure each step is completed.
Please get in touch with any queries.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 36
Many thanks, that worked
by sam moss