Having trouble connecting to the duet Web control using WiFi. When I do manage to connect it loses connection almost straight away and tries reconnecting again. It was working fine until I'd completed a project and homed the machine then had trouble since. Gone through yat and got the ip address and the message that it's connected to the WiFi.
Is this a good question?
Hi Mark,
Thanks for your question.
Can you connect in YAT following this guide: 1. Connecting your Controller via USB - Windows
Then send the command M588 S"*" to wipe all Wifi settings.
And then complete this guide from scratch: 2. Connecting your Controller to a Network - Wifi
Guide
Difficulty:
Easy
—
5 - 10 minutes
Guide
Difficulty:
Easy
—
5 - 10 minutes
Was this answer helpful?
Hi
Thanks for the reply, but unfortunately it hasn't worked, still doing the exact same thing.
Any idea what it might be?
Thanks for your message.
Please note if your network has a 5ghz channel, this could result in it not connecting sometimes. Please either turn off this channel or separate the 5ghz and 2.4ghz channels.
Otherwise, can you connect via USB following this guide:
- 1. Connecting your Controller via USB - Windows
(Mac Version: 1. Connecting your Controller via USB - MacOS)
Once connected do the following:
- In YAT go to Terminal > Settings > Text Settings
- Change the EOL Sequence to <LF>
- Press Ok
- Send the command: M122
- In the response, there will be a line 'Wifi Signal Strength'
- Take note of this value
- Send M122 multiple times, and work out an average value for 'Wifi Signal Strength'
Please let me know what your average Wifi Signal Strength value is.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 5
All Time: 120
