Skip to main content

{{release_title}}

Minor Versionm

by Dozuki System

  1. From the Solid-V-Wheel-Xtreme-Kit packet, with a Precision-Shim in between, insert a 625-2RS-Bearing into either side of the Solid-V-Wheel-Xtreme.
    • From the Solid-V-Wheel-Xtreme-Kit packet, with a Precision-Shim in between, insert a 625-2RS-Bearing into either side of the Solid-V-Wheel-Xtreme.

    • Repeat this for 30 Solid-V-Wheel-Xtreme-Kits. 31 kits are provided, do not assemble the spare one, these can be used for parts if any of the other packets are missing anything.

    • There is one spare Solid-V-Wheel-Xtreme-Kit, do not assemble this one.

    • There will be 30 x Precision-Shims left over from the Solid-V-Wheel-Xtreme-Kits, these can be added to the Precision-Shim packet in the ‘Brackets & Spacers’ box for use later.

Finish Line

83 other people completed this guide.

Robert

Member since: 12/03/2018

22,078 Reputation

104 Guides authored

10 Comments

easy way to do this part is to use a pistol grip clamp,pop the first bearing in a little way add the shim put the outher bearing in a little way put the assembly in the pistol grip jaw pump the pistol grip 2 or 3 times done takes about 20 mins no sore thumbs

wayne - Reply

I had one bag of 85 Precision Shims in the Brackets & Spacers box not in the wheel box. I hope I have enough!!

Richard Moore - Reply

Hi Richard, that is the correct amount. Best Regards Ryan Lock

Ryan Lock -

These are (rightly) a hard press fit. I used a rubber mallet to (*lightly*) tap the bearings in fully place.

david.birch@essex.ac.uk - Reply

I found my precision spacers in the box labeled “brackets and spacers”.

Daniel Cox - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 1,854