-
-
With a Precision-Shim in between, insert a 625-2RS-Bearing into either side of the Solid-V-Wheel-Xtreme.
-
Repeat this for 30 Solid-V-Wheel-Xtreme's. 31 wheels are provided, do not assemble the spare one, these can be used for parts if any of the other packets are missing anything.
-
There is one spare Solid-V-Wheel-Xtreme, do not assemble this one.
-
Cancel: I did not complete this guide.
73 other people completed this guide.
4 Comments
They do need pushing in until they click.
Shims do not sit centrally between bearings, need to be pushed into centre with a thin rod when the bearings are in.
Give each bearing a good squeeze against a hard surface with a wooden block to ensure bearings are properly seated.
Wheels are in MOTION box
Bearings are in MOTION box
Shims are in BRACKETS & SPACERS box
