Skip to main content

{{release_title}}

Minor Versionm

by Dozuki System

  1. With a Precision-Shim in between, insert a 625-2RS-Bearing into either side of the Solid-V-Wheel-Xtreme.
    • With a Precision-Shim in between, insert a 625-2RS-Bearing into either side of the Solid-V-Wheel-Xtreme.

    • Repeat this for 30 Solid-V-Wheel-Xtreme's. 31 wheels are provided, do not assemble the spare one, these can be used for parts if any of the other packets are missing anything.

    • There is one spare Solid-V-Wheel-Xtreme, do not assemble this one.

    So far so good.

    rate this as easy

    Richard Raven - Reply

Finish Line

71 other people completed this guide.

Robert

Member since: 12/03/2018

13,648 Reputation

104 Guides authored

4 Comments

Wheels are in MOTION box

Bearings are in MOTION box

Shims are in BRACKETS & SPACERS box

Paul Howes - Reply

Shims do not sit centrally between bearings, need to be pushed into centre with a thin rod when the bearings are in.

Give each bearing a good squeeze against a hard surface with a wooden block to ensure bearings are properly seated.

Adrian Hardy - Reply

They do need pushing in until they click.

William Walshaw - Reply

I used a #1 Craftsman screwdriver to assemble them. The size is perfect to slide the bearings and shim over so when you snap them together the shim is centered on the bearing.

KevinC - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 2,199