Colin Turner

I have the Mafell router and am finding I have the same issue as the other guys above. The M8 x 25mm bolt seems to be bottoming out before any clamping has been achieved. I ran an M8 tap just in case it was the thread, but that bottoms out too. I may be wrong but to me it seems like the counter bore for the head of the bolt is too deep. Solutions could be a shorter bolt or a new Mafell 43mm clamp with the correct bore and thread depths. I’ll see if I can source a M8 x 20mm bolt locally tomorrow to see if that fixes things.

.It would be useful to have a radius on the internal corner of the cable recess of this part.

I had issues with the M5-Button-Head-Bolt-30mm in this step. Two different types were supplied, one with TWE A2-070, the other with no markings. The ones without markings would not hold the allen key when trying to overcome the initial friction of the nylock nut. I now have one wheel stuck half on and half off.