Page 1 of 2
When using the touch probe, it works great with the Z and Y axis but when it tries to find the X axis it raises 5 mm above the plate so does not touch it.
What type of connector is required for this
What voltage are we looking for and where do you test by, also isn’t this set before distribution
If your eyesight is not good like me the fan connects to the first white pin pair by the power infeed as it’s not shown in any pictures
Why wasn’t this part done prior to assembly of the Z axis that way the cable could be run up the plate, no explanation as to running the cable because these and the switch are not separate items
Recommend not tightening this to the frame until the track is connected as the frame restricts the flexing of the end which could cause damage
Universal Double brackets supplied not triple brackets 16 off
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.