Hi,

After running the test project without issue I've been unable to start any of the actual projects I got the machine for.

It turns out that any gcode I generate (MESHCAM and Carbide Create so far) give out a file not found when started or simulated (giving out M37 instead obvs).

Once uploaded to the workbee's SD card the files can be loaded into the 3d GCode viewer module, edited or renamed. Which tells me the machine can find the files just fine. In the viewer however, only the travels are displayed without any of the operations, unlike what happens if I load the first project.

CAMotics as been used to simulate the files outside their generator and read all of them flawlessly, so I suppose the issue must come from the workbee itself.

I have noticed that the first project will give an object height in the job list while mine won't, so I suspect a compatibility issue somewhere in there.

Is there any specific requirements for the workbee's gcode formatting or otherwise? The files generated by both cam software are .nc and I've already tried renaming them to .gcode like the first project file, without any effect.

I will copy the Diagnostics output below and link the last gcode file I tried via google drive.

11/24/2024, 1:04:55 AM     M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.3 (2021-06-15 21:44:54) running on Duet WiFi 1.02 or later
Board ID: 0JD2M-9F8TA-GJ4TJ-6JKFD-3S86Q-1RVA6
Used output buffers: 3 of 24 (20 max)
=== RTOS ===
Static ram: 23876
Dynamic ram: 74584 of which 332 recycled
Never used RAM 12768, free system stack 124 words
Tasks: NETWORK(ready,89.5%,233) HEAT(delaying,0.0%,386) Move(notifyWait,0.5%,313) MAIN(running,9.8%,514) IDLE(ready,0.2%,29), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 06:02:32 ago, cause: power up
Last software reset at 2024-11-10 15:48, reason: User, GCodes spinning, available RAM 13336, slot 0
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Step timer max interval 0
MCU temperature: min 20.0, current 28.1, max 28.4
Supply voltage: min 23.3, current 23.9, max 24.6, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/1, heap memory allocated/used/recyclable 2048/40/16, gc cycles 0
Driver 0: position 350895, standstill, SG min/max 0/477
Driver 1: position 150326, standstill, SG min/max 0/451
Driver 2: position 15320, standstill, SG min/max 8/460
Driver 3: position 150326, standstill, SG min/max 0/444
Driver 4: position 0, standstill, SG min/max not available
Driver 5: position 0
Driver 6: position 0
Driver 7: position 0
Driver 8: position 0
Driver 9: position 0
Driver 10: position 0
Driver 11: position 0
Date/time: 2024-11-24 01:04:53
Cache data hit count 4294967295
Slowest loop: 188.20ms; fastest: 0.11ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 4.3ms, write time 38.7ms, max retries 0
=== Move ===
DMs created 83, maxWait 7282601ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 1521, completed moves 1521, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 36], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 208.79ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8
- WiFi -
Network state is active
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.26
WiFi MAC address 4c:75:25:1c:ab:c7
WiFi Vcc 3.33, reset reason Power up
WiFi flash size 2097152, free heap 26904
WiFi IP address 192.168.1.101
WiFi signal strength -63dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
11/24/2024, 12:58:55 AM     M32 "0:/gcodes/leos mountain basic gcode mm.nc"
Error: M32: GCode file "0:/gcodes/leos mountain basic gcode mm.nc" not found
11/24/2024, 12:58:35 AM     Connected to workbee.local

The official schedule for the 2024 Mr. Olympia is out, and bodybuilding fans have much to look forward to! Celebrating its 60th edition, this world-famous bodybuilding competition will gather some of the most impressive athletes. Fans can explore all the exciting details about this year’s event and see the amazing lineup of contestants fighting for the Mr. Olympia title.

Watch Mr. Olympia 2024 All Events Live Stream Online From Anywhere. No cable or VPN Required. Onetime Payment, No hidden charge.

Click To: MR Olympia 2024 Live Anywhere Low Price

Click To: MR Olympia 2024 Live Anywhere Low Price

Whether you’ve been a fan for years or are new to bodybuilding, this event offers a chance to watch top athletes show their strength, hard work, and physique. Stay updated and get ready to cheer for your favourite competitors as they take the stage!

Mr. Olympia is an international bodybuilding competition held every year, officially organized by the IFBB (International Fitness and Bodybuilding Federation). Started by Joe Weider in 1965, the goal was to give amateur bodybuilders, like Mr. Universe winners, a chance to earn money in a professional competition. Since then, Mr. Olympia has become one of the world’s most famous bodybuilding events, drawing top athletes and fans from around the globe.

For over 50 years, Mr. Olympia has taken place yearly, growing in popularity and importance. Today, it’s known as the top stage for the world’s best bodybuilders to compete for the title of Mr. Olympia. The 2024 competition marks its 60th anniversary, adding extra excitement for fans and participants.

The Olympia Fitness & Performance Weekend is scheduled for October 10 to October 13, 2024, in Las Vegas, Nevada. This year, the event returns to Resorts World Las Vegas. Besides the main bodybuilding contest, fans can enjoy other events, like the World Fitness Expo, featuring special guests and fun activities for fitness lovers.

The stage is set for an incredible weekend as the world’s best bodybuilders gather to compete. Fans can look forward to a thrilling celebration of fitness and bodybuilding!

Mr. Olympia 2024 Tickets

If you’re excited to join Mr. Olympia’s 60th-anniversary celebration, tickets are now available on the official website at mrolympia. This legendary event brings together the world’s top bodybuilders and offers fans an unforgettable experience with various ticket options:

VIP Packages: For the ultimate experience, VIP packages include early access to special events like press conferences, the “Meet the Olympians” event, the Expo, the VIP After Party, and other perks. There are three VIP package tiers: Silver VIP, Silver VIP Plus, and Gold VIP, each with different benefits. However, these VIP packages are already sold out for Mr. Olympia 2024.

In the hustle and bustle of everyday life, maintaining intimacy can often take a backseat. Vidalista 20mg and Vidalista 60mg offer a solution to rejuvenate your passion and enhance your intimate moments. These medications, containing the active ingredient Tadalafil, are designed to treat erectile dysfunction (ED) by improving blood flow to the penile area, ensuring a firm and lasting erection.

Vidalista 20mg is ideal for those seeking a moderate dosage to regain their confidence and sexual performance. It provides up to 36 hours of effectiveness, allowing for spontaneity and natural romantic encounters. For those requiring a more robust solution, Vidalista 60mg offers a higher dosage, ensuring maximum efficacy and satisfaction.

Using Vidalista not only revitalizes your intimate life but also strengthens emotional bonds with your partner. The increased confidence and performance can lead to a more fulfilling relationship, bringing back the spark that may have dimmed over time.

Rediscover your passion and embrace a renewed sense of vitality in your intimate life with Vidalista 20mg and Vidalista 60mg. Consult with your healthcare provider to determine the best dosage for you and experience the transformative effects of these powerful medications.

This isn't a question, but I figured this might be useful to others, and maybe some useful feedback for ooznest. I've always had big problems with rigidity on the 1500x1500 workbee - I upgraded it with a linear rail kit and beefier side plates, which made a bit of a difference, but I would still get terrible chatter because of the X axis twisting.

I finally decided to just do something about it and added a 800x800x3 mm aluminium box section to the back of my X axis, and my problems have now completely disappeared. I was previously limited to using 3.5mm endmills because anything larger would result in extreme amounts of chatter and vibration, now I can easily take 5mm passes in birch plywood with a 6mm compression bit.

This probably isn't terribly useful for people with a stock workbee, as it's not possible to add an extra extrusion to the back of the X axis with the stock V wheels, but maybe it still helps someone else!

This isn't a question, but I figured this might be useful to others, and maybe some useful feedback for ooznest. I've always had big problems with rigidity on the 1500x1500 workbee - I upgraded it with a linear rail kit and beefier side plates, which made a bit of a difference, but I would still get terrible chatter because of the X axis twisting.

I finally decided to just do something about it and added a 800x800x3 mm aluminium box section to the back of my X axis, and my problems have now completely disappeared. I was previously limited to using 3.5mm endmills because anything larger would result in extreme amounts of chatter and vibration, now I can easily take 5mm passes in birch plywood with a 6mm compression bit.

This probably isn't terribly useful for people with a stock workbee, as it's not possible to add an extra extrusion to the back of the X axis with the stock V wheels, but maybe it still helps someone else!